You have the opening shot of a fragrance bottle on the shelf and a separate close-up for the final frame. You want a short push-in between them, with enough time for viewers to read the label before the next cut. Choose a video generator with two separate frame slots. An image reference can guide the bottle's appearance, but an end-frame control gives the generator a destination for the shot.
Start with Dreamina for a short reveal from two approved product images. If you already build scenes in Google Flow, pick a model with explicit first and last frame support and keep the transition alongside your other shots. Choose Luma Dream Machine when you want to pull an ending image from a board or carry a shot toward a new endpoint. If a package has to stay exact through every frame, build a camera move from its approved image or use a tracked label layer in a video editor.
- Compare the frame controls
- Dreamina: Take a product from wide shot to close-up
- Google Flow: Design the reveal as one shot in a scene
- Luma Dream Machine: Reuse an image from your board as the finish
- When the middle of the transition needs its own image
- Make the transition easy to approve
- Frequently asked questions
Compare the frame controls
Dreamina: Take a product from wide shot to close-up
Use a pair with one clear difference. In Dreamina, select a model and mode with both frame inputs. Upload the opening shot and then the closing one. Use the same package, camera side and aspect ratio for both. A small difference in framing gives the shot somewhere to go without asking the model to reconstruct a side it has never seen. Try a prompt like “Slow, straight push-in toward the front of the bottle, keep the cap upright, keep the text and liquid line in place, steady studio light, settle at the close-up.”
Check the two stills before you spend a generation. Stack them at the intended output size and switch the upper layer on and off. If the bottle is meant to move straight toward the camera, its cap and base should grow around the same visual center. A bottle that jumps sideways while its shadow jumps the other way asks the generator to reconcile two different camera setups. Crop or reposition the supplied stills if that solves it without altering the product. When the change is intentional, describe the sideways move or give the editor a clean cut between views.
Watch the label during the move. Our five-second Dreamina example goes from a wide shot of a fragrance bottle to a closer view. In the frames shown here, the cap, bottle shape and liquid level stay recognizable, and you can still pick out NORI, 01 and 50 ml. Zoom in on the middle as well as the ends before cutting to a printed claim or product detail. The middle has the most distance from both supplied images.
Cost of the five-second example: Our five-second Seedance 2.5 example used 210 credits at 720p. Let the current model and length quote guide your budget. Free users receive daily credits, with 120 per day for US free accounts and allowances varying by region. Dreamina pricing
Google Flow: Design the reveal as one shot in a scene
Use two slots on a compatible model. Choose Frames to Video, place the wide image in the start slot and add the detail image to the end slot. Google's model table lists first and last frames on Veo 3.1 Lite for four-, six- and eight-second clips. Use the current model table when following an older tutorial. The available lengths and controls change with the selected model. Google Flow supported features
Set the interaction with the next cut. If the following shot shows a hand opening the bottle, end this one on a clean front view with the cap in the same position and at roughly the same scale. Keep the product reveal and the hand action as two shots. Pick Dreamina if the job is simply to turn the two supplied product images into a short standalone movement.
Flow’s model-specific credits: Flow measures generation using model-specific credits. Google lists a Veo 3.1 Lite generation at 10 credits for most users and 5 for Ultra subscribers at standard priority. Read the price shown against the model and length before submitting a series of variants. A credit in Flow and a credit in Dreamina represent different allowances. Flow credit costs
Luma Dream Machine: Reuse an image from your board as the finish
Set a start and end keyframe. Select the original product image as the start and bring in the closing image as the end. Luma supports uploading images or choosing generated images on a board for keyframes. Its Ray2 guide documents the start and end controls. Add a short movement instruction. A statement like “track right a few inches and settle on the front label” provides a clearer path than “make it cinematic.” Luma keyframe guide
Preview how the second image arrives. Look at the last half-second. If the bottle keeps drifting as the clip ends, reserve a brief hold on the approved image in your edit. For a shot that should end on an existing label variant, choose a cut or composited change if the rounded bottle needs an exact label position.
Luma generation quote: Luma uses credits, with costs depending on model and settings. Check the rate for the mode that provides both keyframes before choosing a plan or comparing the cost of another take. Luma Dream Machine pricing
When the middle of the transition needs its own image
For a reveal with a critical halfway view, Kling’s standard 4.0 Keyframes workflow supports a start frame, an end frame and additional frames at chosen times. The Flash mode lacks that two-endpoint control. Use an approved midpoint only if it makes the move clearer. For an exact product label, check the full result or use a tracked label layer in your editor. Kling keyframes guide
Lay the two approved stills on a timeline, then insert an empty frame halfway between them. Describe exactly what the product would look like at that midpoint. If the first frame shows the front of a carton and the last shows the back, the middle needs a side panel the model may never have seen. Supply a real side view in a compatible multi-keyframe route or cut between the two approved angles. If the camera only has to keep going in the same direction, continue from the last usable frame instead.
Make the transition easy to approve
- 1
Prepare matched endpoints. Use consistent exposure and color. Crop both to the delivery ratio and leave room for key details.
2Choose one camera move. Start with a push-in, a tilt or a slide. If the end image introduces a new colorway, handle that change on its own timeline or with a deliberate cut.
3Check several frames at delivery size. Compare the brand name, quantities, cap, silhouette and product color. Play once at normal speed and once slowly.
4Keep the approved images in the edit. Use the final supplied image for a clean hold or swap in a motion-controlled still when exact artwork is the priority.
Frequently asked questions
Can I supply any two photos of the same product?
You can use two angles, but similar lighting and a small change in viewpoint give the model a simpler job. For a 180-degree turn, record the move or use a real 3D model if the opposite side needs to match a production item.
Does a last-frame image preserve the label in the middle?
It guides where the movement ends. Check the package in the intervening frames. When legal text or fine print must be exact, use the approved label layer and track it through the move.
Can I end with a different flavor or packaging size?
Yes, if the goal is a deliberate change. For a clean comparison between two SKUs, use the approved frames and a short cut or dissolve so shoppers see each package without an ambiguous intermediate version.
Do I have to buy a plan just to compare the options?
Check the available allowance and the quote for both frame inputs on the chosen model. Start with a single short shot and use the output you actually need to calculate your retry budget.